Valve Manufacturer

ball valve certificate

鍛鋼閥

首頁 > 產品目錄 > 閥門 > 鍛鋼閥

閥門材質 ( 特殊材質介紹 )

Titanium-base series :Ti (Gr.2 , Gr.3, Gr.5, Gr.7...)

Nickel-base series: Monel 400/ Monel 500..

Inconel 600/625/690/750.....

Incoloy 800/825/800H/800HT.....

Hastelloy B3/C/C4/C22/C276/G30....

Zirconium -base series: Zr 702/703/705...

Duplex stainless steel: ASTM F51/F55...

Other corrosion resistance/high temperature resistance alloy:Alloy 20, AISI 321, AISI 310, 904L...

Other material is not listed, please call us!

鍛鋼閘閥
Haitima forged steel gate valves are available in three bonnet designs. The first design is the Bolted Bonnet, with male-female joint, spiral wound gasket, made in F304/graphite. Ring joint gasket are also available on request. The second design is the welded bonnet with a threaded and seal welded joint. On request a full penetration strength welded joint is available. The third design is the pressure seal bonnet, with a threaded and pressure seal bonnet joint.
Gate valve Design construction and Specification.
Haitima gate valve conform to API602, BS5352 and ASME B16.34. Each are tested according to API598, and marking is per MSS SP-25.

2076

鍛鋼閘閥

鍛鋼閘閥

鍛鋼閘閥

Bolted Bonnet

Welded Bonnet

Pressure Seal Bonnet

Construction is as follows:
Full port or Conventional port
OS&Y, Outside screw and Yoke
Two piece self aligning packing gland
Bolted bonnet with spiral-wound gasket, threaded and seal welded bonnet or threaded and pressure seal bonnet.
Integral backseat
Socket weld end to ASME B16.11
Screwed ends (NPT)  to ANSI/ASME B 1.20.1

ITEM

閘閥 800Lb

閘閥 900Lb ~ 1500Lb

壓力密封閘閥 900Lb ~ 2500Lb

 

 

 
鍛鋼球型閥
Haitima forged steel globe valves are available in three bonnet designs. The first design is the Bolted Bonnet, with male-female joint ,spiral wound gasket, made in F304/graphite. Ring joint gasket are also available on request. The second design is the welded bonnet with a threaded and seal welded joint. On request a full penetration strength welded joint is available. The third design is the pressure seal bonnet, with a threaded and pressure seal bonnet joint.
Globe valve Design construction and Specification.
Haitima globe valve conform to API602, BS5352 and ASME B16.34. Each are tested according to API598, and marking is per MSS SP-25.

2078
鍛鋼球型閥 鍛鋼球型閥 鍛鋼球型閥

Bolted Bonnet

Welded Bonnet

Pressure Seal Bonnet

 

Construction is as follows:

Full port or Conventional port
OS&Y, Outside screw and Yoke
Two piece self aligning packing gland
Bolted bonnet with spiral-wound gasket, threaded and seal welded bonnet or threaded and pressure seal bonnet.
Integral backseat
ASME B16.11 Socket weld end to ASME B16.11
Screwed ends to ANSI/ASME B 1.20.1


The disc can transfer valve to be throttle valve, needle valve, ball valve and check valve.

ITEM

球型閥 800Lb

球型閥 900Lb ~ 1500Lb

壓力密封球型閥 900Lb ~ 2500Lb

 

 

 

鍛鋼逆止閥

Haitima forged steel check valves are available in three bonnet designs. The first design is the Bolted Bonnet, with male-female joint, spiral wound gasket, made in F304/graphite. Ring joint gasket are also available on request. The second design is the welded bonnet with a threaded and seal welded joint. On request a full penetration strength welded joint is available. The third design is the pressure seal bonnet, with a threaded and pressure seal bonnet joint.
Check valve Design construction and Specification.
Haitima Check valve conform to API602, BS5352 and ASME B16.34. Each are tested according to API598, and marking is per MSS SP-25.

 

2077

鍛鋼逆止閥 鍛鋼逆止閥 鍛鋼逆止閥
Bolted Bonnet Welded Bonnet Pressure Seal Bonnet

 

Construction is as follows:

Full port or Conventional port
OS&Y, Outside screw and Yoke
Two piece self aligning packing gland
Bolted bonnet with spiral-wound gasket, threaded and seal welded bonnet or threaded and pressure seal bonnet.
Integral backseat
ASME B16.11 Socket weld end to ASME B16.11
Screwed ends to ANSI/ASME B 1.20.1


The disc can transfer valve to be throttle valve and needle valve..

ITEM

升降式逆止閥 800Lb

升降式逆止閥 900Lb ~ 1500Lb

旋啟式逆止閥 800Lb 900Lb ~1500Lb

壓力密封 旋啟式逆止閥 900Lb~2500Lb

壓力密封 升降式逆止閥 900Lb~2500Lb

 

 

鍛鋼 Y 型閥

Haitima Y-Pattern valves are available in three bonnet designs. The first design is the Bolted Bonnet, with male-female joint, spiral wound gasket, made in F304/graphite. Ring joint gasket are also available on request. The second design is the welded bonnet with a threaded and seal welded joint. On request a full penetration strength welded joint is available. The third design is the pressure seal bonnet, with a threaded and pressure seal bonnet joint.
Check valve Design construction and Specification.
Haitima Y-Pattern valve are available in globe and check design configurations.

 

 2049G

鍛鋼 Y 型閥 鍛鋼 Y 型閥 鍛鋼 Y 型閥
Bolted Bonnet Welded Bonnet Pressure Seal Bonnet


Construction is as follows:
Full port or Reduced port
Piston and ball check
Spring available on request

Loose solid disc
Two piece self-aligning packing gland

Integral back seat

Outside screw and Yoke (OS&Y)

Bolted bonnet with spiral-wound gasket, threaded and seal welded bonnet or threaded and pressure seal bonnet

Socket weld End to ASME B16.11
Screwed End (NPT) to ANSI/ASME B1.20.1

 

The disc can transfer valve to be throttle valve, needle valve, ball valve and check valve.

 

ITEM

Y 型 球型閥 800Lb

壓力密封 Y 型 球型閥 900Lb ~ 2500Lb

Y 型 升降式 逆止閥 800Lb

 

 

鍛鋼法蘭閥門

Haitima forged steel integral flanged end valves are available in three bonnet designs. The first design is the Bolted Bonnet, with male-female joint, spiral wound gasket, made in F304/graphite. Ring joint gasket are also available on request. The second design is the welded bonnet with a threaded and seal welded joint. On request a full penetration strength welded joint is available. The third design is pressure seal bonnet, with a threaded and pressure seal joint.
Integral flanged end valves are available in gate, piston check , and swing check design configurations.

Haitima bellow sealed valve conform to API602, MSS-SP-118 (AS APPLICABLE), BS 5352 and ANSI B16.34. Each are tested according to API598 and marking is per MSS SP-25.

鍛鋼法蘭閥門 鍛鋼法蘭閥門 鍛鋼法蘭閥門
Flanged end Globe Valve
2074
Flanged end Gate Valve
2073
Flanged end Check Valve
2075

Construction is as follows:
Full port and conventional port.
ANSI B16.10 face to face according to ANSIB 16.10
ANSI B16.5 F16.5 flanges according to ANSIB16.5
Pressure seal bonnet
Outside screw and yoke.
Two piece self-aligning packing gland.
Integral body flanges
ASMEB16.25 Butt welding end to ASME B16.25
RTJ body bonnet gasket ring joint type.
Bolted bonnet with spiral-wound gasket, threaded and seal welded bonnet or threaded and pressure seal bonnet.

ITEM

法蘭端閘閥 150Lb~600Lb

法蘭端閘閥 900Lb~1500Lb

法蘭端 壓力密封 閘閥 900Lb~2500Lb

法蘭端 球型閥 150Lb~600Lb

法蘭端 球型閥 900Lb~1500Lb

法蘭端 壓力密封 球型閥 900Lb~2500Lb

法蘭端 逆止閥 150Lb~600Lb

法蘭端 逆止閥 900Lb~1500Lb

法蘭端 壓力密封 逆止閥 900Lb~2500Lb