V-Solenoid II

HOME > Product Category > Actuator > The Accessories for Penumatic Actuator > V-Solenoid II

The next generation V-Solenoid II Namur solenoid valves.

Standard features for all series:
  • Robust, reliable patented 2 piston / 4 pillar poppet valve design provides bubbletight shut-off for millions of cycles.
  • 5/2 function or 3/2 function selectable via 180?turn of the patented rotary sealing plate
  • Direct NAMUR standard mounting.
  • Corrosion and impact resistant glass fiber reinforced composite material.
  • Low maintenance through non lubrication design.
  • High air flow (Cv > 1.1) and fast response.
  • Exhaust feedback - provides actuator with clean instrument air, preventing corrosion and galling.
  • Operating with air (lubricated and non lubricated) or nitrogen.
  • Wide operating temperature range: -40oC to 50oC(-40oF to 125oF)
  • Pressure range 2.5 - 8 Bar (35 - 120 psi)
  • Coils easily changed with a wide selection of voltages available.
  • Coil duty cycle 100%.
  • Coil can be fixed at any 90°increment
  • All series CE certified
  • NEMA types 1, 2, 3, 3S, 4 and 4X.
STANDARD series
Our STANDARD series is suitable for most applications and offers excellent value! The very high flow rate (Cv > 1.1) makes it the number one choice for large actuators. We also offer speed control valves should your actuator require slower movement, The coils are certified to CE, CSA and UL standards with a wide range of voltages avail -able.
Connector: DIN industrial form.
Voltages: 12 and 24VDC, 24VAC 50/60Hz,
120VAC 50/60Hz & 240VAC 50/60Hz.






ATEX Ex series
The ATEX EX series provides enhanced safety features: The coils are CE certified and approved by the
Physikalisch-Technische Bundesanstalt (PTB) according to EN 50014:1997 +A1+A2 and EN. 50028:1987
Connector: Encapsulated coil and connector with 3m (9' 10")cable
Voltages: 12VDC, 24VDC, 24VAC 50/60Hz, 120VAC 50/60Hz & 240 VAC 50/60Hz No spacer required for 0? 90?and 270?mounting of coil!
- II 2 G/D EEx m II T6, T5 or T4 and IEC Ex m II T6, T5 or T4.
- EX II 2 G/D EEx m II T6, T5 or T4
- IEC EX m II T6, T5 or T4





Intrinsically Safe series
If you need to maintain highest safety standards, theINTRINSICALLY-SAFEseries will be your choice: Intrinsically safe coils, CE and CSA certified, FM and PTB approved for hazardous locations: Connector: DIN EN 175301-803-A (ISO 4400) Coil: Voltage: 24VDC, Current >37mA, Impedance: 275 Ohm +8%, Tamb(Max) 50 .Barrier \(not included): Voltage range: 21.6 to 28VDC, Peak values 28VDC, 115mA, 1.6W No spacer required for 0? 90? and 270?mounting of coil!
- II 2G EEx ia IIC T6 or T4 approved
- IEX ia IIC T6 or T4 approved
- FM IS Class I Group A, B, C and D, Class II Group E, F and G, Class III


EX-PROOF series
The coils of the EX-PROOF series are CSA certified and FM approved for hazardous locations and have been tested according to CAN/CSA-E79-0-95 and CAN/CSA -E79-18-95 for CSA as well as ANSI/ISAS12.00.01- 1999 and ANSI/ISA-S12.23.01-1998 for FM. - Ex m II T4 and Division 1 - IEx ia IIC T4, Class I Group A,B,C and D, Class II Grp. E,F and G, Class III
Connector: 1/2" metal thread connection conduit entry, 600mm(24") leads
Voltages: 12VDC, 24VDC, 24VAC 50/60Hz, 120VAC 50/60Hz & 240VAC 50/60Hz No spacer required for 0?90? and 270?mounting of coil!





Dimensions

Standard Atex Ex Ex Proof I-Safe
A 125.9 125.3 113.5 125.3
B 66.9 66.7 65.7 68.7
C 53.0 53.0 53.0 53.0
D 18.5 18.5 18.5 18.5
E 27.0 27.0 27.0 27.0
F 78.0 78.0 78.0 78.0
G 62.7 62.7 62.7 62.7
H 17.0 17.0 17.0 17.0
I 15.0 15.0 15.0 15.0
J 24.0 24.0 24.0 24.0
K 17.7 17.7 17.7 17.7

configuration for double acting actuators. De-energized state, with supply to port 1, flow is directed to port 4 and port 2 is vented to atmosphere via port 3.
configuration for spring return actuators. De-energized state, supply port 1 is blocked and port 2 exhaust is fed back to port 4 with excess vented to atmosphere via port 3.
Specifications and Order Information

Electrical (+/- 10%):
12VDC & 24VDC
24VAC,120VAC & 240VAC,50/60Hz

Duty Cycle:
100% continuous service

Insulation Class :F

Protection Class :
IP65, NEMA 1, 2, 3, 3S, 4 and 4X

Other voltages are available on request.

Construction:

Valve Body:
Reinforced Polyamide(PA)

Sealing Material:
Proprietary elastomer

Inlet Port:
1/4" NPT or G1/4" MS Zinc plated

Exhaust Port :
1/8" NPT or G1/8" MS Zinc plated

Temperature Range:
- 40°C ~ 50°C ( - 40°F ~ 125°F )

Pressure Range:
2.5 ~ 8 bar (35 ~120psi )

Response Time:
20ms(ON)40ms(OFF)

Media / Air Flow: Cv > 1.1
V-Solenoid II series Model Code Voltage* Options
Standard VS2STD -XXX -XX
Atex Ex VS2ATEX -XXX -XX
Ex Proof VS2EX -XXX -XX
I-Safe VS2IS -024 -XX
*12VDC,24VDC,24VAC,120VAC,240VAC, Intrinsically Safe series 24VDC only.


Options Code
Stainless Steel Bolts SST
Connector with LED LED
Exhaust Muffler 1/8" NPT EN8
Exhaust Muffler G1/8" EG8
Speed control valve 1/8" NPT SN8
Speed control valve G1/8" SG8
Order Examples:
V-solenoid II, Standard 120VAC, no options:
VS2STD-120
V-solenoid II, ATEX Ex 240VAC, LED:
VS2ATEX-240-LED
V-solenoid II, I-Safe, Stainless Steel, LED:
VS2IS-024-SST-LED


<<Back